What's the Towing Capacity of a Peugeot 3008?

The Peugeot 3008 has an average towing capacity of 1,000KG to 1,750KG which will allow the driver to tow anything from a cycle carrier up to a small caravan. You must always check the weight of what you are towing as overloading your vehicle can cause damage to your chassis. To receive an accurate towing capacity for your Peugeot 3008 please refer to your vehicle's VIN plate.

Which Towbar is best for my Peugeot 3008?

There are three different styles of towbars available for the Peugeot 3008, a fixed swan neck towbar, a fixed flange towbar and a detachable swan neck towbar. The fixed flange towbar is a permanent style of towbar, meaning it cannot be removed from the vehicle’s chassis. The fixed flange towbar is the only style of towbar that is equipped with a back plate, this allows for towing accessories to be bolted on the plate leaving the towball free to tow with. If you are planning on towing a Caravan with an ALKO stabiliser an ALKO towball would need to be purchased before fitment. The fixed swan neck towbar is another style of permanent towbar, however, due to its thin design it is popular with Kodiaq owners with rear parking sensors. The fixed swan neck allows for a lot more clearance between the towball and parking sensors than the fixed flange towbar, therefore making it a lot less likely to cause interference when the vehicle is put in reverse. The Fixed swan neck is also ALKO compatible meaning there is no requirement for an ALKO towball if you are planning on hitching up a caravan with an ALKO stabiliser. The fixed swan neck is compatible with all clamp-on styles of towbars, trailers, and caravans. The detachable swan neck is the only detachable style of towbar that we offer and its sleek design is popular with customers wanting to preserve the aesthetic of their vehicle. The detachable swan neck is easily removed from its housing using a twist-and-push method. For protection, each detachable towbar comes with a key to lock the towbar neck into place during use and ensure that nobody else can remove the towbar if left on the vehicle. All the detachable swan neck towbars are compatible with all clamp-on cycle carriers, trailers, caravans and ALKO stabilisers.

Will a Peugeot 3008 need a bumper cut?

When fitting any of the three styles of towbars to your Peugeot 3008 there will be a small bumper cut made to the vehicle's undertray. The bumper cut is classed as non-visible as it will only be noticeable if looking underneath the car at its undertray. During the towbar installation, the bumper will be removed, upon completion, this will be carefully refitted. Our professional towbar engineer will always begin the fitment by guiding you through the process and explaining any modifications that may need to be made to your vehicle, and then again when the engineer has finished the fitment, he will show you how the towbar works and answer any questions you may have.

Mobile Towbar Fitting for Peugeot 3008

Fully Guaranteed Towbar Fitting

Professional Towbar Fitters

5 Star Trustpilot Reviews

Expert Online Advice

Secure Online Payments

Peugeot 3008 Towbars

Peugeot 3008 Towbar

The new Peugeot 3008 represents a major step forward for the brand, combining bold design with a strong focus on electrification and innovation.

Built on Stellantis’ advanced STLA Medium platform, the 3008 is offered with mild hybrid, plug-in hybrid, and fully electric powertrains, giving drivers a choice between efficiency, performance, and sustainability. Its new fastback-inspired silhouette introduces a sportier and more aerodynamic look, complemented by Peugeot’s signature three-claw LED lighting and a redesigned front end that emphasises modern sophistication.

PEUGEOT 3008 DETACHABLE SWAN NECK TOWBAR

3008 (P64) 2024 - Present

See Details

Fitting Included

£895.00

12 Month Warranty

Fitting Included

Configure Towbar

Detachable swan neck towbar, where the neck of the towbar can be removed when not in use.

Detachable towbars avoid any issues with parking sensors picking up the tow bar neck, so ultimately if your car has reverse parking sensors this would be the best option for you.

Neck removable when not in use
No issues with reverse parking sensors
Compatible with ALKO Stabilisers
Compatible with most Cycle Carriers

PEUGEOT 3008 DETACHABLE SWAN NECK TOWBAR

3008, Hatchback, P84 (Not Hybrid) 2016 - 2024

See Details

Fitting Included

£895.00

12 Month Warranty

Fitting Included

Configure Towbar

Detachable swan neck towbar, where the neck of the towbar can be removed when not in use.

Detachable towbars avoid any issues with parking sensors picking up the tow bar neck, so ultimately if your car has reverse parking sensors this would be the best option for you.

Neck removable when not in use
No issues with reverse parking sensors
Compatible with ALKO Stabilisers
Compatible with most Cycle Carriers

PEUGEOT 3008 DETACHABLE SWAN NECK TOWBAR

3008 Crossover (Not Hybrid-4) 2009 - 2016

See Details

Fitting Included

£875.00

12 Month Warranty

Fitting Included

Configure Towbar

Detachable swan neck towbar, where the neck of the towbar can be removed when not in use.

Detachable towbars avoid any issues with parking sensors picking up the tow bar neck, so ultimately if your car has reverse parking sensors this would be the best option for you.

Neck removable when not in use
No issues with reverse parking sensors
Compatible with ALKO Stabilisers
Compatible with most Cycle Carriers

PEUGEOT 3008 SWAN NECK TOWBAR

3008 (P64) 2024 - Present

See Details

Fitting Included

£815.00

12 Month Warranty

Fitting Included

Configure Towbar

On a Swan Neck towbar, the towball is part of the neck of the towbar.

A swan neck towbar can look tidier on the vehicle because it is more compact and is less likely to set any reverse parking sensors off. We can not guarantee this as it is dependant on the bumper shape and location of the parking sensors. We would recommend the Detachable Swan Neck Towbar if your vehicle has parking sensors.

Tidy and compact
Compatible with ALKO Stabilisers
Fits most clamp-on Cycle Carriers
If your vehicle has parking sensors, it is likely the fixed swan neck Towbar will trigger the parking sensors. We would recommend a Detachable Towbar instead

PEUGEOT 3008 SWAN NECK TOWBAR

3008, Hatchback, P84 (Not Hybrid) 2016 - 2024

See Details

Fitting Included

£815.00

12 Month Warranty

Fitting Included

Configure Towbar

On a Swan Neck towbar, the towball is part of the neck of the towbar.

Tidy and compact
Compatible with ALKO Stabilisers
Fits most clamp-on Cycle Carriers
If your vehicle has parking sensors, it is likely the fixed swan neck Towbar will trigger the parking sensors. We would recommend a Detachable Towbar instead

PEUGEOT 3008 SWAN NECK TOWBAR

3008 Crossover (Not Hybrid-4) 2009 - 2016

See Details

Fitting Included

£795.00

12 Month Warranty

Fitting Included

Configure Towbar

On a Swan Neck towbar, the towball is part of the neck of the towbar.

Tidy and compact
Compatible with ALKO Stabilisers
Fits most clamp-on Cycle Carriers
If your vehicle has parking sensors, it is likely the fixed swan neck Towbar will trigger the parking sensors. We would recommend a Detachable Towbar instead

PEUGEOT 3008 FLANGE TOWBAR

3008 (P64) 2024 - Present

See Details

Fitting Included

£815.00

12 Month Warranty

Fitting Included

Configure Towbar

The flangeball towbar is a commonly used type of towbar in this country.

On this type of towbar, the towball is bolted on to a faceplate on the tow bar, this allows accessories such as bumper guards and cycle carriers to be bolted behind the towball.

Versatile
Can be used with most accessories.
Can be used with a bumper guard.
Not recommended if your vehicle has reverse parking sensors.

PEUGEOT 3008 FLANGE TOWBAR

3008, Hatchback, P84 (Not Hybrid) 2016 - 2024

See Details

Fitting Included

£815.00

12 Month Warranty

Fitting Included

Configure Towbar

The flangeball towbar is a commonly used type of towbar in this country.

On this type of towbar, the towball is bolted on to a faceplate on the tow bar, this allows accessories such as bumper guards and cycle carriers to be bolted behind the towball.

Versatile
Can be used with most accessories.
Can be used with a bumper guard.
Not recommended if your vehicle has reverse parking sensors.

PEUGEOT 3008 FLANGE TOWBAR

3008 Crossover (Not Hybrid-4) 2009 - 2016

See Details

Fitting Included

£795.00

12 Month Warranty

Fitting Included

Configure Towbar

The flangeball towbar is a commonly used type of towbar in this country.

On this type of towbar, the towball is bolted on to a faceplate on the tow bar, this allows accessories such as bumper guards and cycle carriers to be bolted behind the towball.

Versatile
Can be used with most accessories.
Can be used with a bumper guard.
Not recommended if your vehicle has reverse parking sensors.

More about the Peugeot 3008

Inside, the cabin sets new standards for Peugeot’s design language with the introduction of the Panoramic i-Cockpit, a sweeping 21-inch curved display that merges the instrument cluster and infotainment screen, alongside touch-sensitive controls and the brand’s distinctive compact steering wheel.

In terms of performance, the plug-in hybrid (PHEV) versions deliver up to 55 miles of electric-only range, while the mild hybrid models provide excellent fuel efficiency for everyday driving. The fully electric E-3008 extends the range of options even further, offering competitive range and power figures that make it suitable for longer journeys. Practicality remains a key strength, with a spacious boot and flexible interior design ensuring the 3008 continues to meet family and business needs alike. Advanced driver-assistance systems and the latest safety technology also feature throughout the lineup, ensuring the new 3008 is as secure and connected as it is stylish and efficient.

What's my Towing Capacity?

The 3008 supports up to a maximum braked towing capacity of 1,550kg, depending on the model. Please refer to the VIN plate, which is usually located in one of the door frames, to confirm your vehicle’s exact capacity.

Which Towbar is best for my Renault Master?

The fixed swan neck towbar features a single, curved design that integrates the towball and neck into one piece. Its streamlined shape gives the vehicle a clean, modern appearance while helping to reduce the chance of interference with parking sensors. It is also compatible with ALKO stabilisers for caravans.

The detachable variant of the swan neck towbar offers the same elegant design and towing strength as the fixed version, but with added flexibility. The neck section can be easily removed when not in use, preserving the vehicle’s appearance and ensuring parking sensors remain unaffected. It’s a practical, discreet option for drivers who want reliable towing performance without a permanently visible towbar.

Will it need a bumper cut?

Towbars for the new 3008 require a non-visible cut to the bumper, helping to minimise the impact of a towbar fitting on the vehicle’s appearance.

Why choose Towbar Express?

With over 30 years of industry-leading experience, at Towbar Express, know what we're doing. Our commitment to excellence is unmatched—we exclusively employ our highly skilled towbar engineers, guaranteeing superior service tailored to your needs. Unlike other providers, we never outsource our work, ensuring meticulous attention to detail and unmatched quality every time.

Our engineers undergo continuous training to stay ahead of the curve, ensuring they possess the latest knowledge to handle new vehicle makes and models with ease. At Towbar Express, we're dedicated to understanding every aspect of your vehicle, providing you with peace of mind and confidence in our service.

Don't just take our word for it—our extensive collection of Trustpilot and Google reviews speaks for itself. With thousands of satisfied customers leaving us glowing 5-star ratings, each review reaffirms our unwavering commitment to excellence. Experience the difference with Towbar Express today and join our ever-growing list of delighted customers!

How do I book a Towbar Fitment?

We know our customers lead busy lives, which is why our engineers will come to your home or your place of work. You can choose a morning appointment between 8 am and 12 pm or in the afternoon between 12 pm and 6 pm. Our team will fit your Towbar at a time that’s convenient to you. Our Towbar fitting service can take as little as one hour and up to four hours, depending on your vehicle.

To get a quote, all you need to do is search for your vehicle above or enter your registration number and postcode above. You can book your date, time, and location online, and we will take care of the rest. We will bring everything needed to complete the job in one appointment. If you order any Cycle Carriers or accessories with your Towbar, the Engineer will also bring those.

vehicle towbars