zappi is the #1 best selling solar compatible charger. Designed for convenience, not compromise. zappi is an adaptive EV charger that can take power from the grid, solar, or both.
Economy tariff sense input
3 Charging modes; eco, eco+ and fast
Ethernet port and built-in Wi-Fi for connecting to the internet
Pin code lock function
Optimises micro-generation self consumption
OZEV approved
EV charging from surplus solar or wind generation
Programmable timer function
Dynamic load balancing for maximum installation flexibility
Integral cable holster
Charge and event logging
Complete with latest software and tamper protection boundary
This is for the purchase of the unit only, you will need to arrange installation by a qualified electrician separately. If you follow this link, you will find many qualified EV Charger electricians near you and around your area.
Future proof, intelligent electric car charging. zappi is the #1 best selling solar compatible charger. Designed for convenience, not compromise.
zappi is a smart EV charger with a difference. Not only does it operate as a standard EV charger, but it also has optional charging modes to utilise 100% green energy generated from your Solar PV or wind generation. Increasing the Return On Investment (ROI) for your panels and electric car, the zappi is easy to install and user friendly. But don’t worry, if you don’t have solar panels installed, the zappi will still operate as a standard EV charger harnessing power from the grid.
Being the first-ever solar EV charger of its kind, our innovative team has carefully designed features and functions to give you complete control of your electric car charging experience. Paired with the myenergi app, you can set timers to utilise economy tariffs, use the boost function, monitor your devices, and so much more!
This future proof, intelligent electric car charger was conceived, evolved, and manufactured in-house right here in the UK.
Power
7KW 1ph
A single-phase (1ph) charger can charge your EV at the maximum of 7.4kW. This is most commonly found in homes and other domestic properties.
22kW 3ph
A Three-phase charger can charge your EV at a maximum of 22kW (vehicle permitting). They are more common on workplace and commercial buildings, though modern homes with 3 phase supplies can benefit from faster charge rates.
Tethered
Type 2 Tethered
Tethered chargers, come with a cable attached to the unit which cannot be detached. The cable has a Type 2 plug attached which has become the worldwide industry standard and is suitable for all modern EV’s. (excluding a handful of early Type 1 models, hence if you have Type 1 you should choose the untethered unit)
Colour
The zappi units are available in 2 colours; black or white.
This is for the purchase of the unit only, you will need to arrange installation by a qualified electrician separately. If you follow this link, you will find many qualified EV Charger electricians near you and around your area.
Please note: The below information is to be used as a guide only!
Vertical Load; is based on the Towbar's Vertical Capacity. Each may be different dependent on the towbar manufacturer's recommendations.
Towing Capacity; is based on the Towbar Towing Capacity and not your Vehicle's Towing Capacity.
Bumper Cuts; are as a guide only and some vehicles will need a tow panel from the manufacturer.
Visible Cut; again, is as a guide only as it depends on your bumper shape and the towbar fitted to your vehicle.
Rated Supply Voltage
230V AC Single Phase
Supply Frequency
50 Hz
Rated Current
32A max
Standby Power Consumption
3W
Integral Earth Leakage Protection Integral
30mA Type A RCD + 6mA DC protection (EN 62955)
Economy Tariff Sense
Input 230V AC sensing (4.0kV isolated)
Tethered Cable Length
6.5 Meters
Mechanical - Enclosure Dimensions
439 x 282 x 122mm
Mechanical - Protection Degree
IP65 (weatherproof)
Mechanical - Enclosure Material
ASA
Installation - Circuit Breaker
32A Curve B
Installation - Earthing Arrangement
TN: can be connected to the PME supply. Complies with BS 7671:2018-amd1:2020
Installation - Compliance
LVD 2014/35/EU, EMC 2014/30/EU, EN 62196-2:2017, IEC 62955:2018, ROHS 2011/65/EU, CE Certified EN 61851-1:2019* * -T variant is fully compliant with EN 61851-1:2019 Zappi versions that do not have the -T suffix comply with EN 61851-1:2019 with the excepti
