More about the Mazda CX-30
The Mazda CX-30 has several safety features that can take any stress out of your towing experience, these include Hill Launch Assist which will momentarily hold the vehicle’s brake once the pedal is released to avoid rolling back. This feature is especially useful when towing and will give you peace of mind during a hill start. On the top-spec model of the CX-30, you would benefit from Front Cross Traffic Alert which assesses the area on either side of the front of your vehicle when pulling out of junctions, this system will alert the driver if an oncoming vehicle is detected with an audible warning.
What's my Towing Capacity?
The towing capacity for the Mazda CX-30 supports up to 1200kg which is sufficient for towing a cycle carrier, trailer or even a lightweight caravan. This capacity could vary between models, therefore it is always recommended to check your vehicle’s VIN plate, which can usually be found on one of the door pillars, this will give you the accurate towing capacity for your specific Mazda CX-30.
Which Towbar is best for my Mazda CX-30?
All three of the towbars we offer are available for fitment to the Mazda CX-30, these are the Fixed Flange, Fixed Swan Neck and Detachable Swan Neck towbars. Any of these would be a great addition to your vehicle and allow you to begin your towing journey with your Mazda CX-30 right away.
The Fixed Flange Towbar is the cheapest of our three options available and is a towbar that will be permanently attached to your vehicle, meaning it cannot be removed when not in use. The unique feature of the Fixed Flange is that it is fitted with a plate which enables you to use bolt-on style accessories such as a bolt-on cycle carrier while keeping the towball itself free for hitching up your caravan for example.
The Fixed Swan Neck towbar is extremely versatile and is readily compatible with ALKO Stabilisers and also fits clamp-on style cycle carriers. The Fixed Swan Neck is thin and sleek in design, meaning it is less likely to be detected by your parking sensors, should your vehicle have these. However, this cannot be guaranteed as the towbar is permanently fixed to the vehicle.
The Detachable Swan Neck towbar is identical in design to the Fixed Swan Neck, however, the neck of the towbar is detachable, meaning that you can remove the towbar neck when not towing. If you desire your Mazda to look untouched when not towing the detachable swan neck is the perfect choice as the electrical plate will also fold up underneath the bumper, removing all visible evidence of a towbar when not in use. The Detachable Swan Neck towbar is also compatible with all clamp-on style cycle carriers, trailers and caravans, and is also compatible with ALKO stabilisers. The detachable feature of this towbar also guarantees that your parking sensors will not be affected when you are not towing.
Will it need a bumper cut?
No bumper cut is required for the Mazda CX-30.
