AUDI A4 FIXED FLANGE TOWBAR (A4 ALL ROAD ESTATE)

Please enter your postcode

Please enter your postcode below to calculate fitting costs to your location

Find Your Towbar
Select a Towbar
Customise & Book Fitting
Checkout

Flange Towbar

Fixed Flangeball Towbar

from

£516.00

AUDI A4 FLANGE TOWBAR

(A4 All Road Estate)

2008 - 2012

Versatile
Can be used with all accessories.
Can be used with a bumper guard.
Fits with all cycle carriers.
Not recommended if your vehicle has reverse parking sensors.

Find Out More

The flangeball towbar is a commonly used type of towbar in this country.

On this type of towbar, the towball is bolted on to a faceplate on the tow bar, this allows accessories such as bumper guards and cycle carriers to be bolted behind the towball.

Customise your towbar

Tailor your towbar to suit your needs

*Fitting Date

Maximum number of characters: 255

Fitting Location

Maximum number of characters: 15

Vehicle Registration

Maximum number of characters: 15

Please enter your vehicle's registration number so that we can make sure we get the correct towbar for you.

*Towball

Standard Towball (Included)
Standard 50mm Towball

A Standard 50mm Towball is fitted as standard on a fixed flangeball towbar.

It is suitable to tow a standard UK trailer or caravan, and to attach most cycle carriers to.

This towball is NOT suitable to tow a caravan fitted with an Al-Ko stabiliser.
ALKO Towball +£34.99
ALKO Towball

If you have a fixed flange ball towbar and you intend to tow a caravan that is fitted with an Al-Ko Stabiliser it is vital that you also have an Al-Ko towball fitted.

Using a standard towball with an Al-Ko stabiliser would be dangerous, and may result in damage to your car and/or caravan.

In most cases it would be a cheaper option to select a fixed swan neck towbar.

*Electrics Socket Type

7 Pin Electrics (Included)
7 Pin Electrics

Single 7 Pin Electrics are fitted as default with a towbar installation.

They provide power to operate the lights on a standard UK trailer or cycle carrier.

If your trailer has reverse lights, or Alko-ATC Control fitted, you may need 13 pin electrics.

Even if you are only using your towbar to support a cycle carrier you will still need these electrics to power the lights on the cycle carrier, or on a light board over the bikes.

This is a legal requirement because bikes on the carrier may obscure the lights on your car.
Twin Electrics +£49.99
Twin Electrics

Twin Electrics (12S) Electrics are fitted in addition to the standard Single 7 Pin Socket if you will be towing a caravan built pre-2008 that has 2 power cables.

The 12S socket provides power for:
- Your caravan reverse lights.
- A permanent 12 volt live feed to your caravan.
- Live feeds to your caravan that are only live when your car engine is running to provide charge to your caravan battery etc.
13 Pin Electrics +£54.99
13 Pin Electrics

13 Pin Electrics are fitted when you will be towing a caravan built from 2008 onwards.

The 13 Pin socket combines the old style twin 7 pin sockets in to one.

The socket provides all the power needed to operate the road lights on your trailer or caravan, and provides 12 volt power to operate all the other functions of your caravan.

You can use a trailer or cycle carrier that has a 7 pin plug, but you would need an adaptor which is available in our Accessories section.

*Electrics Wiring Type

Vehicle Specific Wiring (Included)
Vehicle Specific Wiring

Each kit is designed specifically for the vehicle that it is fitted to, and rather than soldering or using 'Scotch Locks' to connect the towbar wiring, which is the case with universal aftermarket wiring, these kits interface with the vehicle systems in the same way as the vehicle manufacturer intended.

If your vehicle is less than 3 years old, or is still within it's manufacturers warranty, you would need vehicle specific wiring to protect that warranty.

Other towing functions such as Trailer Stability Control that are available on your car would be activated when vehicle specific wiring is fitted.